Convenient angle of view of a standard lens challenges photographers’ expression. The SIGMA 30mm F1.4 DC HSM has outstanding optical performance in order to fully perform its best expressive quality at all shooting distances. Optimized power distribution minimizes field curvature thereby preventing a loss of image quality at the edges of photographs. The use of a double aspheric lens minimizes spherical distortion, astigmatism and coma. Coma of point light sources is minimized near the edge of the image, and an attractive round bokeh effect is produced at large-aperture settings

The lens incorporates a rear focus system that prevents focus-dependent variation in aberration, making high-level image quality possible throughout the entire image. With their unchanging barrel length, these lenses also enhance balance and stability for the photographer. Furthermore, since the front of the lens does not rotate, polarizing filters can be used with extra convenience.

From an early stage, flare and ghosting are thoroughly measured to establish the design which is resistant to strong incident light such as backlight. Sigma’s Super Multi-Layer Coating reduces flare and ghosting, and provides sharp and high contrast images even in backlit conditions.

The maximum magnification is 1:6.8, making it excellent for close-up photography.

The HSM (Hyper Sonic Motor) ensures a silent, high-speed AF function. Optimizing AF algorithm, smoother AF is achieved. It also enables full-time manual focusing capability which allows sensible focus adjustment by simply rotating the focus ring.

The 9 blade rounded diaphragm creates an attractive round bokeh at large-aperture settings.

The new product lines incorporate rubber for the attachment part of the provided lens hood. For better usability, the designs of the lens cap and AF/MF changeover switch have been improved. In order to ensure high accuracy of the product, all metallic parts and the new compound material, TSC (Thermally Stable Composite), which has a high affinity to metal parts, are housed internally.

This lens incorporates a brass made bayonet mount which has both high accuracy and durability. A special treatment to reinforce its strength is applied to the surface giving it greater strength and making it highly resistant to long-term use.

Attaching the lens to an optional USB DOCK (planned to be available in 2013) plugged to your computer and using dedicated software “SIGMA Optimization Pro”, you can update the lens firmware and adjust parameters such as focus.

We used to measure lens performance with MTF measuring system using conventional sensors. However, we’ve now developed our own proprietary MTF (modulation transfer function) measuring system (A1) using Foveon 46-megapixel direct image sensors. Even previously undetectable high-frequency details are now within the scope of our quality control inspections. The SIGMA 30mm F1.4 DC HSM will all be checked using this “A1” before they are shipped.

All Sigma’s manufacturing right down to molds and parts is carried out under an integrated production system. We are now one of the very few manufacturers whose products are solely “made in Japan”. We like to think our products are somehow imbued with the essence of our homeland, blessed as it is with clean air and water, and focused, hard-working people. We pride ourselves on the authentic quality of Sigma products, born of a marriage between highly attuned expertise and intelligent, advanced technology. Our sophisticated products have satisfied professionals and lovers of photography all over the world, because our manufacturing is based on genuine craftsmanship, underpinned by the passion and pride of our experts.